Battery Replacement for 6K & 6000 Series Products.

Running more than 199 programs in 6000 Products. The 6000 products are set up with a BCD program select mode that allows you to select 199 different programs.

Scaling With the 6000 Products. If you are having problems with scaling in the 6000 products, the most common cause is not having the scaling factors both inside and outside of your start up program

RS232 Troubleshooting for 6K / 6000 Products. This guide serves as an aid in establishing RS232 communication with with any 6K or 6000 Series stand-alone product, as well as troubleshooting an RS232 communcation problem with these …

6000 Servo Products I/O Updates. There are several inputs on the 6000 servo products which are updated once every 5 system update rates.(The system update rate is set with the SSFR command) These inputs include: drive fault inputs, …

Using JOG commands with AXIS identifier. An axis can be jogged outside of the program it is attached

RS485 wiring to an i-Motor. All i-Motors have the capability of communicating RS485 to many different RS485 ASCII compatible devices, such as Industrial Computers, Label Makers, etc. Specifically i-Motors communicate using the 2-wire …

Does the motor coil float between the magnets? All of the Trilogy motors have no interaction or attractive force between the coil and magnet track. Ironless motors only produce force in the direction of travel.

PS Connector Motor Power Pinout. Connector Pin # (Size 1.0), Connector Pin # (Size 1.5), Wire Color, Function. 1, U, Black 1, Phase U

Ethenet equipment needed for communication?